Are u necking down brass to 22 creedmoor or buying actual 22 creedmoor head stamped brass? If you are necking down I just bought standard 22 creedmoor Hornady die and ripped expander ball out as I run a mandrel to set neck tension. If necking down that bushing die will leave a nasty doughnut as it doesn't size the entire length if the neck. Had zero issues with the Hornady FL die inducing any run out issues. I also found that best seater so far is a Forster 6 creedmoor when running the heavy 22 bullets. If running actual 22 creed brass the 6.5 type s will be just fine with correct bushing.