accubond

Just returned from a white tail hunt and my first experience with 6.5CM and Accubond bullets. Nothing to brag about size wise but the 6.5/Accubond combo performed great. Shot 3 deer during the week. Two were walking straight at me and a third broadside through weeds. Ranges were 90 to...

Hey all, I'm trying to work up a load with my 7 rem mag and Viht N560 using 150 grain Barnes TTSX and 160 grain Nosler Accubonds. I'm trying to figure out the best way to reference N165 or N160 load data to identify a starting point for the N560. For the Barnes 150 gr TTSX: There is no VV data...

Brought my son a new T3X Tikka in .270 calibre, basic Leopold VX-3 HD running with some hand loads. New Hornady brass, Nosler AccuBond 140gr using 57gr RL19 running at 3,000 fps. Went out to a local range than goes out to around 750 metres, he ran out of windage adjustment before then, yet at...

Anyone run a 200 gr Accubond over N570 in their 300 rum? Looking for as much velocity with that bullet as I can safely get but still maintain good accuracy. Curious if anyone has played with that combo and what you found out?

This past deer season I took a coues with a 168gr Berger with my 7mm Rem Mag, my first kill with a Berger and total destruction of vitals, dead on the spot. I've taken several deer with the 139gr SST with my 7mm-08 with the same results, quick kill with vitals turned to smush. Some deer with...

I bought a mauser m18 in 300wm 24.5 in barrel last year and have been trying to find a good long range hand load for it, I tried some hornady 208elds with some luck but nothing I was super impressed with. I checked free bore and as long as I can load them in the mag I'm .2 from the lands, I...

Guys, does anyone have own practical experience with 250gr. Accubond in 9.3mm cal. (.366")? Nosler states BC G1= 0.494. But Noslers numbers were always a bit inflated. Any info is appreciated.

Has anyone noticed any difference in performance on game between the long range AB and the original Accubond? Going to be using a 280ai. 26” tube. Also any load data or advice would be helpful this is my first 280ai. Deer, coyotes are the game here 400-500 yards max. Thank you.

My first world problem: Tikka T3 lite blued 338 Win Mag or Tikka T3X lite blued 338 Win Mag Can anyone explain to me the differences in the ejection ports. I'm wondering if the new T3X has any real advantage in this area, regarding COAL. Is magazine length still going to be...

I recently had a friend come into my store who retrieved a bullet from an animal he had killed in Spain, in early January. He seemed a little excited to see what the actual bullet weighed. Either of us even knowing what to expect. He was shooting a 175 grain Accubond LR from a 28 Nosler 360...

New to the forum here and I’m needing some help. Been reloading for two 264wm (Remington and Winchester both 24”). I recently switched to 140 gr accubonds as to keep from tip deformation on the partitions. Using rl 22 starting a 55 gr and going up. Decent 1” group with an occasional flyer. But...