hunting hard
Member
Hi to all. Anybody having issues with new ADG brass not chambering? I just bought a new box of ADG brass to reload for my new Sako S20 and when I tried chambering the brass, all except 4 will not chamber. I measured the base to shoulder, using Hornady comparator, and there's .006-.007 difference from the 4 brass that will chamber. I tried bumping the shoulder of one of the brass by .005 and now it went through the chamber. Would this be okay to do? I used a Redding body die to bump the shoulder and resize the body or better yet to do Full length resize. I also did neck resizing using a neck bushing after bumping the shoulders. I'm only new to reloading so any help/advice is very much appreciated. Thanks. I'm thinking on bringing my rifle too to a gunsmith to have them measure the headspace ( bolt face to the lands if that the correct term).