Treeslug

I hate it when I am forced to choose leaning against a Saguaro to steady my old frame.

Everything can make a difference. How tight the barrel is, how many round that are through it, the internal finish of the barrel, brand...

Don’t do it, use the 7mm Mag. Elk are a tough animal and the conditions always seem to be less than ideal.

Shot placement is key...... but to compare a 7 mag. to a 6mm on a 1000 # animal is foolish..... I would definitely stay with more...

I've looked at the DIY induction annealer too. I want to first find out if annealing is something I even find helpful and necessary with...

Not telling anyone what to do. To each their own. I will say that there is something to be said about purchasing something that is...

If you decide not to go this route, look at the EP Integration annealer. Very reasonably priced and works great.

As for RL 19, a load in the 75-77 grains should break 3,000 fps with a 180. As always, rifles are individual, so work up as needed.

How long is your barrel and what COAL? I am pushing the Berger 190 VLD with H4831 SC (old load) @ 3043 FPS out of 23.5" barrel. As with...

I’m thinking if you can get a factory 26” barrel 300 WM from Howa it would be a great shooter

Ours are both totally factory 1500’s and not just barreled actions.

I honestly don’t think you can go wrong with the Howa’s. My wife has a 1500 270 and I have a 1500 7RM and they have the smoothest...

Go for it , if it don’t shoot to your standards accurize it and make it shoot . I have found no matter how much you like something...

Well, I have zero experience with suppressors, but a REM 700 running an Edge and a brake I do. I ran a 32” barrel to start, no taper at...

I have a 28” 338 Norma Improved that I hunt with a suppressor on. The length isn’t a problem as long as you are hunting open country but...