I know I said I would like to have a carbon fiber wrap barrel on the rifle I pick but I’m not dead set on it if I can find a good reliable accurate rifle with a steel barrel I would purchase it
I forgot to mention that in my post.i would like a 22 to a 26 inch barrel rifle . I would like to try a carbon fiber wrap barrel to keep it alittle lighter but still do good for bench work and not heat up like a pencil barrel. I know most rifles are 1/9.5 twist and I would like something with a...
Hello all Im looking for recommendations for a factory rifle in 280 ackley improved ive been researching this cartridge for the past two or three years and ive been going back and forth between it and the good ol 30-06 but I believe I’ve settled on the 280 ackley but im not sure what rifle to...
I was in your shoes about five years ago I started out with once fired Winchester brass mostly due to it was what I use to shoot most of in my 308 before I started hand loading. Any ways I have always used federal 210 or 210 match primers and varget,imr 4064,cfe223 or tac also some big game or...
I’ve used Barnes and Hammers and I use all hammer bullets now they are easy to load for and have great on game performance and they produce very accurate loads from my rifles.i have no complaints what so ever
If you hand load I would recommend the 166 grain hammer hunter. That’s what I load in mine. I haven’t used factory ammo in mine. Now I have used 178 eld x,185 classic hunters and 152 grain hammer hunters in my 300 wsm with good success I’m sure they will work fine in 300 wm as well
I would recommend 300 wsm or 300 wm but these are they only 300s I have experience with.there is a lot of f class guys using the 300 wsm with good success.now the cartridge I would like to try is a 300 Norma mag or 300 Norma mag improved
Sorry I just went and re read your post. Since you're not reloading. I would go with Barnes ttsx. I also like nosler ammo as well. I've used federal premium with Barnes or nosler bullets and Winchester deer seasonxp with good results. In my 7mm-08 I first used 150 grain Norma American whitetail...
Have you looked at hammer bullets? That's what I'm loading in mine 118 grain hht. I use hammers in my 308s and 300 wm and 300 wsm and they are great on game and easy to load for
Hello all I’m looking for a Winchester model 70 sa stock for one piece bottom metal for a #4 or bigger barrel contour mine measure .850 10 inch’s in front of recoil lug.It is for a coyote lite model rifle.I am interested in a stock with a different style floor plate as well long as you have the...
308 win srp brass. 7mm-08 using same brass there is also 6.5x47 or 7mm saw with alpha 7mm saw brass or 308 srp brass You could also go with a 260 rem as well