RAMhunter123

I tested three loads today 37.8 of Varget I got 3453 average I didn’t shoot paper but I was stinging steel out at 470 in a 15 mph...

i'm sure we all remember way back when you know 2017 when primers were 3 1/2 cents apiece

I can’t speak confidently on where Arken scopes are made. I can say when I went to my gunsmith last year, anther gentleman was in there...

@Ua26fitter, I was able to handle the 3/4” above bore 3D printed version of the RokStok at the Unknown Munitions shop (no barreled...

Do you have to make a fired case? No, you don't HAVE to. Hornady makes modified cases for most every cartridge out there but they are...

@tahoe1305 I'm shooting a 26" Proof Research SS PreFit Barrel on my Terminus Zeus QC action with a 1:7.5 twist.

https://www.brunoshooters.com/product/federal-primers-210-standard-large-rifle-1000-ct/?utm_source=shootingbot.com

https://www.powdervalley.com/product/cci-250-large-rifle-mag-primers-1000/?utm_id=PVI

Finally was able to make it out to the range and put some to the test. Decided to test these in my 6GT with Varget, starting at 32.5gr...

This may have already been said, but I have been using H4831SC with 180gn ELD-Ms in my 22" 7PRC. Coupling this with ADG Brass has led to...

NICE. You can never have to many and a 223 is very efficient and Fun. 👍

For your viewing pleasure.

Run them in a dasher. Settled around 3240 with 24” proof barrel and varget. Should work real well for you.

I have them loaded in a 6Predator GAS Gun and hope to try them this week.

Thanks for the starting point!