-
-
Panhandlin Pat reacted to GuntherRLII's post in the thread .20 caliber estate rifle build with
Love.
Your uncle is a ***. -
Panhandlin Pat reacted to Frank in the Laurels's post in the thread Primers "Too Dry ???" with Like.
..I've used primers that were decades old and stored under about every condition imaginable with zero misfires in 6 decades of reloading..
-
I emailed my GS this morning about a rebarrel and he replied “we can do that” I think I’m gonna lean towards a AI 26” 8tw, will discuss...
-
Panhandlin Pat replied to the thread 6mmAI.I got on a hot 6mm kick a couple years ago, built a 6-284 and a 6mm ai. Like others said, since you’re gunna have to machine the barrel...
-
👆👆this👆👆
-
To go AI on the Ruger, you're going to have to take the barrel off and have the chamber end machined off at least 0.04". @Idaho Lefty...
-
Panhandlin Pat replied to the thread .20 caliber estate rifle build.This resonates at home with me. Years ago my granddad gave all his firearms to my uncle. Grandad passed in 2019. Fast forward to last...
-
Panhandlin Pat replied to the thread Is a slightly 'hot' load OK for the brass and barrel?.If you run a warm load don’t leave the ammo in a hot pickup. Shot my truck gun yesterday (savage 308) and blew the extractor out. Second...
-
Panhandlin Pat replied to the thread 7X57.Hands down the best power I’ve used in both my modern 7x57s is reloder 16. Alliant also list full power load data. I have 2 loads for a...
-
Please turn off your Cap locks. Looks like you are shouting at us. Thanks.
-
Panhandlin Pat replied to the thread Anybody convert a M70 CRF LA BDL to…..Get you some dummy rounds and see how it feeds. 6.5x55 will feed like it’s greased. I’ve built a 6x284 on a Mauser and didn’t have any...
-
Panhandlin Pat reacted to SecretSquirrel38's post in the thread Threading Remington 300 Win Mag Factory Barrel with Like.
A great jobs by the gunsmith David at the Lebanon Gun Shop in Lebanon TN. It is threaded at 1/2-28 and an adapter has been ordered to...
-
Panhandlin Pat reacted to SecretSquirrel38's post in the thread Threading Remington 300 Win Mag Factory Barrel with Like.
It was threaded today at 1/2-28 and I ordered an adapter. Also had a custom machined brake made. I will post pics tomorrow. Thanks...
-
Panhandlin Pat reacted to VinceMule's post in the thread Threading Remington 300 Win Mag Factory Barrel with Like.
Panhandle, you may want to consider using JB weld to epoxy that brake on the barrel. Threads do wear over time. Threads cut to a class...
-
Panhandlin Pat replied to the thread Threading Remington 300 Win Mag Factory Barrel.Either do this or thread it 1/2”. For reference, a friend of mine has 2 factory weatherby 300 magnums, with factory breaks. Both RMEF...
-
-
Loading…
-
Loading…
-
Loading…