Recent content by chesser33

All reloads are once fired from that rifle. I've tried 58 gr of imr 4831 and 64 grains of imr 7797. They are at the min charge. The cases are easy to chamber and are easy to extract when not fired. Once fired it's easy to lift the bolt but hard to extract.

I recently purchased a sendero in 7mm rem mag and it fires factory ammo fine, but any reloads that I have tried running through it results in a stuck case. I have tried different powders at the min charge and have adjusted my die set numerous times to try and bump the shoulder back. Has anyone...

Thanks for the input, I've decided to take it to a local gunsmith. I'm going to have him find out what the problem is, blueprint the action and install a jewel trigger.

Called remington customer service and they will take care of it. I was worried about having it bedded and it voiding the warranty but the guy from customer service said that it should not be a problem since the problem I'm having Problems with the extractor. I've heard horror stories about...

Both have been 7mm mag.

I'm getting frustrated with remington senderos, I bought one a month ago and it had a bur in the chamber which made it difficult to close the bolt. Called the retailer and they said would exchange it for a new one. Got the new rifle and tried loading and unloading it, everything looked good, no...

After looking at some fired cases I noticed some scratches on them, so I'm guessing I've got a bur in the chamber. I called scheels and they said they could order in a new one but it's going to take 6-8 weeks to get another one in. Or just take it to a gunsmith and have him work on it.

Yes, that was the first thing I did with the rifle, even before I tried to chamber a round.

I just purchased a sendero SF II in 7mm rem mag and I bought a box of hornady factory ammo and I had a hard time closing the bolt with a case in the rifle and even got one stuck in the chamber.I bought a box of remington ammo and they do chamber easier than the hornady but are still somewhat...