can1010's latest activity

use the same bullet for the measurement same 140, same 147 ect. just put them away for future use. you will never get accurate...

could be carbon. barrel needs to be clean and carbon free for an accurate measurement. your method could also be the problem. but the...

Something else that helps is to use a primer pocket uniformer, I had the same issue with ginex lrp, once I reamed them no more issue, I...

if you are using range pickup make sure you remove all of the crimp. i cut mine and check with pin gauge if there is any crimp left you...

quick update on the small rifle primers. this is our fun load with thrown charges. LC21 brass, 24.3 TAC, 75gr Hornady bthp. 2.245 oal...

Found this thread about a month ago and decided to try converting 7mm SAUM to 6.8 Western. It worked beautifully. I sized ADG 7mm SAUM...

keep within the velocities recommended by manufactures 1800fps. minimum is a good place. don't think energy is useless, while velocity...

270-338 RUM IMP. light weight monos 126-128 class 3600-3700 fps. or 165 matrix 3300fps which was the intended bullet. first barrel with...

i handle mine just like everyone else but have to wonder how much oil it takes to make a meaningful difference. you can visually see...

Larger calibration weights with my fingers the same as you, my very small check weights with a pair of tweezers.

Hi guys......yep, its true, the old goat is out to pasture! You guys were so good to me that you grew me out of my ability to keep up...

Hello everyone Derek Webster here, My Goal for SWC is to make sure it runs very smoothly with plenty of inventory. Because SWC will be...

I remember reading about Rich and his wildcats on here many, many moons ago even before i was a member, wish him well in his retirement.

I do tend to forget those at times! 😜 memtb

more than one blow was because you forgot to loosen the set screws you used to lock the bolt from blowing backwards