-
-
A very good day to all, While I am rather fond of guns I have an extra portion of liking in bolt action rifles, and the more accurate... -
It was sanctioned by the club that invented 1k BR. Its real. Unlike some new organizations they have a legit process for scoring...
-
oneshot.onehit replied to the thread Cold Bore fliers.For what it's worth, on my 22LR on the "first shot" that needs to be good on something very small or at distance while at an event, I...
-
If you can say a prayer for me. I have to go in for surgery and the hospital for an IV of antibiotics. They are having an issue of...
-
Have someone else shoot it just to eliminate your own variable. Are you starting with same bore condition that has proven consistency...
-
New world record 1000 yd. heavy gun benchrest record set at the Williamsport Pa. club last week. Ten shots slightly over 2 inches with a...
-
-
oneshot.onehit replied to the thread Best Mechanical 100 Grain Broadhead for Ravin R10 Crossbow.SEVR 2.0s out of my Ten Point 505 Nitro - deadly at 500 fps for three seasons now. 487 grain arrow Osoh
-
oneshot.onehit replied to the thread Help with reloads not feeding.Have you checked the overall length of the brass itself and are you trimming to the correct length. Just asking, maybe some of the necks...
-
Did you use the following web site? https://outdoorproductsplus.company.site/
-
oneshot.onehit reacted to FEENIX's post in the thread Walleye Fishing - Pierre, SD - June 1 and 2, 2026. with
Like.
Home away from home from 30 May to 4 Jun for six fishing buddies. Initial charging station set-up the night before fishing. Day 1 (1... -
oneshot.onehit reacted to Varmint Hunter's post in the thread Neck sizing: My brain is fried, Im retarded...the math doesnt math with Like.
My post was just to add a little pertinent info that was provided by the Redding tech service guys. Sorry if you took it any other way...
-
I have gotten a lot of them off with heat, you can roundabout get temps by using oil, rub a very thin coat of oil on the brake and heat...
-
oneshot.onehit reacted to Rick Richard's post in the thread Neck sizing: My brain is fried, Im retarded...the math doesnt math with Like.
I try to follow manufacturers recommendation and I do use bushings, but not too worried about the orientation since I Mandrel the inside...
-
oneshot.onehit reacted to Mike Matteson's post in the thread Neck sizing: My brain is fried, Im retarded...the math doesnt math with Like.
Most of the bushing I use have a bevel in the bushing to start with. It help in the alinement of the neck into the bushing. That being...
-
-
Loading…
-
Loading…
-
Loading…
