6.5prc powder choices

VV560 seems interesting, but wondering for those who reload this cartridge use what powder with what bullets? I know the answers can be varying because of what the barrel likes best, but still which powder has been the most go too powder for this cartridge? Powder charge info isn't necessary, just which bullet with which powder works in your gun?
I'm using VN565 with 143 eldx & 147 eldm
WLR primers and Lapua brass with a Christensen Ridgeline and pretty much get
0.750". 10 shot groups consistently with both, but seems to like the 143 better
 
On paper staball hd looks ideal for simi heavy to heavy with a longer barrel. I started a post to see if anyone had results to share but got zip. I have some on the way and by the data iv'e seen it looks idel for the 6.5 prc. Good case fill, good burn rate, good/low pressures. It looks like a winner for my longer barrel prc's. I should have it soon
 
VV560 seems interesting, but wondering for those who reload this cartridge use what powder with what bullets? I know the answers can be varying because of what the barrel likes best, but still which powder has been the most go too powder for this cartridge? Powder charge info isn't necessary, just which bullet with which powder works in your gun?
H1000 and Berger 140 grain vld's
 
VV560 seems interesting, but wondering for those who reload this cartridge use what powder with what bullets? I know the answers can be varying because of what the barrel likes best, but still which powder has been the most go to powder for this cartridge? Powder charge info isn't necessary, just which bullet with which powder works in your gun?
VN 565 powder Winchester, large rifle primers, Lapua brass. 15 shot MOA
143 gr eldx
 
H4831SC, N560, N565, RL23, H1000 for me.
H4831SC, N560 & RL23 for up to a 140/143.
RL23, H1000 or N565 for 140+.
I have tested all these plus N570 & Retumbo. Couldn't get enough in the case to find pressure in a SA.
I shy away from RL26 here in AZ, unless it is strictly a late season rifle.
 
Top