SOLD/EXPIRED Brux 300wsm barrel

[hunter0925]

This barrel came off a 300wsm I had built but decided to get away from the break and couldn't add the inches I wanted back on the barrel so it has been sitting in the safe. It is a brux 4 contour, was cut to 25 inches and then threaded for the vais break (included). Greg at Southern precision fluted the barrel and then a local Smith cerakoted it for me. There are approximately 300 rounds down the barrel. $270 shipped to lower 48.

 

[Mram10us]

Good price for all that work

 

[tdean]

Off a rem 700? You have the lug ?

 

[hunter0925]

Off a rem 700? You have the lug ?

I reused the lug for the new barrel

 

[tdean]

Threaded for a 700?

 

[hunter0925]

Threaded for a 700?

Trued 700 yes.

 

[cohunt]

you have load data for it? how short could it be cut down to before the fluting starts?

 

[hunter0925]

you have load data for it? how short could it be cut down to before the fluting starts?

I was shooting h4831sc behind a 200gr accubond in Winchester brass around 2850 if I remember correct.
There is 2.875 inches from the crown to the start of the fluting. There is plenty of barrel shank left for it to be set back also if that was wanted or needed.

 

[hseII]

I was shooting h4831sc behind a 200gr accubond in Winchester brass around 2850 if I remember correct.
There is 2.875 inches from the crown to the start of the fluting. There is plenty of barrel shank left for it to be set back also if that was wanted or needed.

What was your COAL with the 200 Accubond?

I assume 25" + the brake?

 

[hunter0925]

What was your COAL with the 200 Accubond?

I assume 25" + the brake?

I have 2.864 written in my notes. And yes, it is 25 plus the brake.

 

[hunter0925]

I have 2.864 written in my notes. And yes, it is 25 plus the brake.

I was shooting out of a factory Remington box so I was limited on seating depth changes.

 

[lou400a]

What's the muzzle threaded to and the twist rate?
Thnx

 

[hunter0925]

What's the muzzle threaded to and the twist rate?
Thnx

I believe (trying to remember correctly) vais brakes require a 1/2x32 tpi. The twist is a 10 twist.

 

[cohunt]

muzzle diameter?

what profile on the barrel?