• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED two 7-300wsm brux barrels

DCGS

Official LRH SPONSOR
Joined
Dec 5, 2007
Messages
505
Location
Central North Carolina
I am changing out two guns for a customer with only a few rounds down them. Both were really good shooters. One is a 15 palma with an SSG slot port brake. It is coated in earth tan K&G gun kote. The other is a #4 sporter with bead blast matt finish. Both were finished at 26 inches. The customer wants to go with a standard caliber. The sporter he took an elk in New Mexico at over 350yds. They are both on stiller actions so should screw on any stiller with no head space problems. The palma can be sold with or without the brake. I can just make a thread cap for it. There are maybe 150 rounds down it and less than 75 down the sporter. Lets start out at 600.00 for the barrel and brake and 450.00 for the sporter. Dan
 

Attachments

  • DSCN0174.jpg
    DSCN0174.jpg
    106.6 KB · Views: 38
  • DSCN0175.jpg
    DSCN0175.jpg
    38.8 KB · Views: 37
Just a quick note, I'm the owner of the two barrels that Dan is helping me sell. Dan's write up is spot on, both barrels produced great results. Only reason I'm selling is to fund a switch to a different caliber. In addition to the barrels i have a good amount of once fired brass-- Norma 270 wsm sized up to 7mm, some loaded rounds with the 180 Bergers and a Forster 7wsm Mircrometer Seater Die. Please let me know if interested.
Thanks!
 
I'm interested in the brass and dies. Can you send me some prices? Thanks.
 
Gnutson:
I will get a count on brass and prices on die/brass this evening and get back to you.
Thanks!
 
Here is what I have along with the barrels:

1) 116 pieces of 1 fired
2) 20 pieces of 2x fired
3) 71 loaded rounds - 67.2 gr of H1000 & Berger 180 VLD - Lot 3764
4) Forster Ultra Seating Die (7wsm) - $50
5) Redding Bushing Die w/ Sinclair 7mm Mandrel - $35
6) Wilson Inside Neck Reamer - $20
7) Wilson WSM Case Holder for Trimmer - 1 new case / 1 fired case - $10/each

All brass is Norma
I just sold 300 pieces of new Norma brass for $1.25/ per piece, so let's say $0.50 for these pieces.
Loaded rounds would be $1.00 per round plus $25.00 shipping
Thanks!
 
Can I mix and match ? Is so I'll take the 1x and 2x brass for $68 and the Forester Ultra Seater for $50.
 
That's fine, brass and Forster sold to you. PM your info please.
 
Sporter barrel is SPF, still have the other barrel and break for sale.
 
Top