barrel breakin??

Discussion in 'General Discussion' started by KingJames338Lap, Jul 16, 2009.

  1. KingJames338Lap

    KingJames338Lap Member

    Messages:
    7
    Joined:
    Jul 15, 2009
    I am looking for some advice on barrel break in for a HS Precision
    Pro Series HTR 2000 Chambered in a .338 Lapua Mag.
     
  2. Coyboy

    Coyboy Well-Known Member

    Messages:
    2,132
    Joined:
    Jan 30, 2005
    Call HS and see what they recomend for their barrels.
     

  3. J E Custom

    J E Custom Well-Known Member

    Messages:
    7,313
    Joined:
    Jul 29, 2004
    I would recomend talking to HS and asking them what they recomend first.

    Some barrels makers do not require that you break there barrel in but if done
    properly it will extend barrel life.

    Then if your not sure about it log on to Lilja barrels and look in the FAQ section.

    He has a good break-in procedure that I use on every barrel because it tells me how good
    a barrel is about fowling and when it is ready to start using.

    J E CUSTOM
     
  4. KingJames338Lap

    KingJames338Lap Member

    Messages:
    7
    Joined:
    Jul 15, 2009
    Hey Guys Thanks for the input :)