APS,
Seems I designed the little bomb a bit to square, was having some extraction issues at top pressure. I sent the reamer back to get 15 thou more taper put in the case body. Should about to about a grain and a half of capacity loss!!!
I also got sick of turning case necks so I ordered a properly sized neck reamer to open the chamber neck up so no turning would be needed. This way I have the option for both.
Once I get the reamer back I will set the barrel back and rechamber to make sure this solves the sticky extraction issues and then I will get the FL dies ordered for some real serious load testing.
Getting custom tooling made sure takes alot of time though!!!
Its coming, just slow going right now!!
Kirby Allen(50)