Bergerblaster
Well-Known Member
I recently purchased a Zermatt Origin Long Action for a 7 PRC build. My plan was to run BDL bottom metal. Has anyone had good luck with the Origin and BDL?
I run Remington factory BDL on an origin and have no issues.I recently purchased a Zermatt Origin Long Action for a 7 PRC build. My plan was to run BDL bottom metal. Has anyone had good luck with the Origin and BDL?
Thanks for the info!I run Remington factory BDL on an origin and have no issues.
No problem that is what we all come here for. There is a 7mm PRC barrel for sale on the classifieds currentlyThanks for the info!
Sounds like your working with an ADL if your top loading.I bought a left hand action. I don't have a barrel yet, but set it up in an old stock with BDL bottom metal and loaded some rounds in it to test it out. The 3rd round is really difficult to get down because it's on the right side of the action and under the pic rail/ejection port. There is plenty of room in the mag box, just difficult to get fingers in there and get the right angle and pressure to feed it down.
Ha well I have always top loaded my BDL rifles. To be honest I've personally never seen anyone load a BDL from the bottom. Is bottom loading with BDL something everyone does and I've just been doing it wrong my whole life?Sounds like your working with an ADL if your top loading.
I've loaded both ways, typically I load from the topHa well I have always top loaded my BDL rifles. To be honest I've personally never seen anyone load a BDL from the bottom. Is bottom loading with BDL something everyone does and I've just been doing it wrong my whole life?