I have for sale a Remington 700 chambered in 6mm Dasher. The rifle was built to try my hand at 1000 yard benchrest competition. It would make a great 600-1000 yard benchrest gun (light class) or a long range varmint gun. I have only test fired the rifle and it functions great. I just don't have time to enjoy it and would like to see it put to good use. The stock is a real head turner and the pictures don't do it justice, I am no I am asking $2750 for everything. firstname.lastname@example.org I near Raleigh and can meet FTF or must ship to FFL. See link for many more pics: 6-Dasher Photos by operator1 | Photobucket Here are the specs: •Built on a 6 digit Rem. 700 LA receiver. Cerakoted graphite black •Action and bolt have been trued and threads recut – all single point cut on lathe and dialed to .0002" * Chambered in 6mm Dasher using a new PTG reamer (.2704″ no-turn neck and .104″ freebore ) •PTG BR single shot follower – Devconed in place •Bolt has been sleeved, firing pin hole has been bushed and sako extractor installed •Bolt handle has been timed and welded by Dan @ Accutig •PTG firing pin and bolt shroud •Side bolt release installed •Holland recoil lug – pinned •Brux Heavy Varmint 1-8 twist barrel. 29" - 32" with muzzle brake •Harrells Precision Radial Muzzle break - barrel threaded 5/8-32 TPI and blended to barrel •Custom estucheon •Jewell BR trigger •Pillar bedded using Devcon •Beautiful Shehane Tracker II Stock – French Walnut African Obeche- Aluminum Buttplate – Finished in High Gloss (15 coats of clear coat, wet sanded to 2000 grit and buffed. •Badger Ord. 20MOA scope base – cerakoted graphite black •Nightforce rings - cerakoted graphite black •Sightron 10-50x60 target dot scope ( New ) 1/8 clicks •Wilson 6mm dasher neck die and bullet seater •Whidden gunworks Full Size Die • 1 box of Lapua 6mm brass and some SMK 107 gr.