I have this posted on accurateshooter under the username bsumoba. I am new to this forum, but have history on accurateshooter as well as 100% positive feedback,.
Selling a full turnkey 338 Edge Barrel for a Bat M with with Brass, bullets, dies, accessories and a load data for a developed load that is shooting ½" 5-shot groups at 100 yards and going about 2780 fps. Barrel only has 85 rounds through it to develop a load.
Willing to sell the Bat M mag bolt as well separately.
My cost was approximately $2,400 dollars for all. Selling everything for $2,000 and you get everything below.
Barrel
• Bartlein 5R 30", 1:9.5 twist HV contour with a blended 4-port Harrell Brake. Smithing done by Dana English out of Florida.
Brass
Remington 300 RUM Brass (Parent Case) HARD TO FIND!!!
• 50 fireformed 338 Edge rounds (which are currently loaded and I will fire off as a last hoorah for me and give you the formed brass). These have been necked up and necks turned to approximately 0.014". They are shot 2 times each and have been recently annealed.
• 81 pieces of necked up and annealed brass
• 101 pieces of virgin 300 RUM brass
• 10 once fired 7mm RUM that can be necked up to 338
• 1 piece 300 RUM once fired
Total pieces of brass: 243 – all Remington 300 RUM headstamped cases
Bullets
• Approximately 860 bullets of 300gr Berger Hybrid OTM
• (5) 10 round boxes for loaded rounds
Tools
• Sinclair XL Bullet Comparator for 300gr bullets
• 3 TiNi Bushings - .363 / .364 / .365
• Sinclair .338 Carbide Neck turning and Expander mandrel
• Sinclair .338 Bullet Comparator
• Whidden FL Bushing Dies and Seating Die with Micrometer Stem
Selling a full turnkey 338 Edge Barrel for a Bat M with with Brass, bullets, dies, accessories and a load data for a developed load that is shooting ½" 5-shot groups at 100 yards and going about 2780 fps. Barrel only has 85 rounds through it to develop a load.
Willing to sell the Bat M mag bolt as well separately.
My cost was approximately $2,400 dollars for all. Selling everything for $2,000 and you get everything below.
Barrel
• Bartlein 5R 30", 1:9.5 twist HV contour with a blended 4-port Harrell Brake. Smithing done by Dana English out of Florida.
Brass
Remington 300 RUM Brass (Parent Case) HARD TO FIND!!!
• 50 fireformed 338 Edge rounds (which are currently loaded and I will fire off as a last hoorah for me and give you the formed brass). These have been necked up and necks turned to approximately 0.014". They are shot 2 times each and have been recently annealed.
• 81 pieces of necked up and annealed brass
• 101 pieces of virgin 300 RUM brass
• 10 once fired 7mm RUM that can be necked up to 338
• 1 piece 300 RUM once fired
Total pieces of brass: 243 – all Remington 300 RUM headstamped cases
Bullets
• Approximately 860 bullets of 300gr Berger Hybrid OTM
• (5) 10 round boxes for loaded rounds
Tools
• Sinclair XL Bullet Comparator for 300gr bullets
• 3 TiNi Bushings - .363 / .364 / .365
• Sinclair .338 Carbide Neck turning and Expander mandrel
• Sinclair .338 Bullet Comparator
• Whidden FL Bushing Dies and Seating Die with Micrometer Stem
