Which sizing die for 300 RUM

[taltom]

Didn't see a 300 RUM sizing die at Whidden's site. Which bushing full length sizing die seems to work best for standard Remington Sendero chambers?

Thanks much,

Terry

 

[taltom]

Anyone?

 

[WeiserBucks]

I don't use Widden, but I have had nothing but success with Redding products

 

[DUSTY NOGGIN]

I don't use Widden, but I have had nothing but success with Redding products

id go with the redding as well
https://ads.midwayusa.com/product/322337/redding-competition-bushing-3-die-neck-sizer-set?utm_medium=shopping&utm_source=google&utm_campaign=Reloading - Dies & Shellholders&utm_content=322337&cm_mmc=pf_ci_google-_-Reloading - Dies & Shellholders-_-Redding-_-322337&gclid=EAIaIQobChMI8p260KGc1wIVUoJ-Ch08UAKMEAQYASABEgJ0DPD_BwE

the bushings wont come with it
https://ads.midwayusa.com/product/1012518899/redding-neck-sizer-die-bushing

then you might want the competition shell holders
https://www.midwayusa.com/product/3...m-300-winchester-magnum-338-winchester-magnum


and heres a promo code , to take off some of that sting
https://www.couponchief.com/midwayusa

 

[318lll9740]

Didn't see a 300 RUM sizing die at Whidden's site. Which bushing full length sizing die seems to work best for standard Remington Sendero chambers?

Thanks much,

Terry

I have had several 300 runs, it's my favorite caliber , including a sendero, and the RcBS dies have always performed well, especially for the price!

 

[taltom]

I have had several 300 runs, it's my favorite caliber , including a sendero, and the RcBS dies have always performed well, especially for the price!

I'll use a Wilson seating die for sure. Which exact sizing die are you having good luck with?

Thanks

 

[318lll9740]

I'll use a Wilson seating die for sure. Which exact sizing die are you having good luck with?

Thanks

https://www.midwayusa.com/product/1011278027/rcbs-2-die-set

Here u go