Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What would cause this
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="slikmrc" data-source="post: 2082638" data-attributes="member: 116436"><p>Primer should be seated at least .002 below the case base. If the primer is below the base I would check the bolt face surface around the firing pin hole. If you pierced or have blown a primer you could have scoring on the bolt face. I would deprime the case and see if it is still tight. A tight case should not affect the primer unless it is seated shallow. Should be able to use the rod on a caliper or a straight edge on the base to check the primer depth. That load does look pretty hot with what looks like dual ejector marks.</p></blockquote><p></p>
[QUOTE="slikmrc, post: 2082638, member: 116436"] Primer should be seated at least .002 below the case base. If the primer is below the base I would check the bolt face surface around the firing pin hole. If you pierced or have blown a primer you could have scoring on the bolt face. I would deprime the case and see if it is still tight. A tight case should not affect the primer unless it is seated shallow. Should be able to use the rod on a caliper or a straight edge on the base to check the primer depth. That load does look pretty hot with what looks like dual ejector marks. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What would cause this
Top