Wc 867 powder in 338-378

dgr416

Well-Known Member
Joined
Mar 17, 2003
Messages
588
Location
Madison ,ga
I have used wc 867 Powder in my 264 win mag but never anything else .I know it's really temp senative and you have to watch it .I usually use r25 but it's a lot more expensive .I was told wc867 is very close to h870 which I have used a lot .I got good groups with the h870 and wc867 powders in my 264 win mag. Hope this powder will work but loads are around 120 grains full case .
 
It works in the cold awesome below 80 degrees but above that it's a high pressure powder .I did realky good with it in the 264 win mag .I have a bunch of it too but it's a good crap hit the fan powder too because it is so cheap .
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top