Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Long Range Scopes and Other Optics
WARNE MAXIMA RINGS
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="James Jones" data-source="post: 118647" data-attributes="member: 8843"><p>I have used the DD rings and bases on several hard kicking rifles and have never seen a failure. Granted the MK4 setup is stronger and I can see why Leupold would push selling them as they cost about 5 times what a DD set would </p><p>I've got a few set of the DD ring and bases set up with the Burris rings. One thing I did to make them stronger is tig weld them to the base after they have been installed and straitened. I generaly open all my scope base screw holes to accept the bigger 8-40 screws to help in strength.</p><p>One thing I have relized is that any decient scope mounting setup is going to be alot stronger then your scope , su if you drop your rig on its top and you break a scope ring chances are you not gonna need it anyway.</p><p></p><p>On another note the rings from TPS are actualy very good quality and require minimal lapping , I would put them up against anybody elses ring of the same basic desgine</p></blockquote><p></p>
[QUOTE="James Jones, post: 118647, member: 8843"] I have used the DD rings and bases on several hard kicking rifles and have never seen a failure. Granted the MK4 setup is stronger and I can see why Leupold would push selling them as they cost about 5 times what a DD set would I've got a few set of the DD ring and bases set up with the Burris rings. One thing I did to make them stronger is tig weld them to the base after they have been installed and straitened. I generaly open all my scope base screw holes to accept the bigger 8-40 screws to help in strength. One thing I have relized is that any decient scope mounting setup is going to be alot stronger then your scope , su if you drop your rig on its top and you break a scope ring chances are you not gonna need it anyway. On another note the rings from TPS are actualy very good quality and require minimal lapping , I would put them up against anybody elses ring of the same basic desgine [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Long Range Scopes and Other Optics
WARNE MAXIMA RINGS
Top