TONS of Dies and accessories

[G19Jeeper]

Grading
-Very good has little signs of wear with very light or no surface rust
-good is functionally good with some signs of wear, marks or light exterior rust/patina
-fair will have light to moderate exterior rust
-poor/for parts will have heavy wear or rust. None of the poor dies retain much value and likely won't be listed here or will be very very cheap.


Shipping is $10 flat rate and can be combine with the brass or Bullets or anything else I listed elsewhere. Purchases over $160 ship free


-NEW Hornady 2 die .204 Ruger $40
-NEW Hornady 2 die 6.5 Grendel $50
-NEW Hornady 2 die .300 PRC $50
-NEW RCBS .270 WSM FL $37
-NEW RCBS .243 WSSM $35

Lyman
-Multi Deluxe .44 Spec/Mag RN/SWC "very good" $38 SOLD
-.270 Win 2 die set "Good" $15
-tungsten carbide .38/.357 sizing die "very good" SOLD
-Lyman .357 Seater die "good" $8 SOLD


RCBS
-.357 .38/.357 Seater $10 "very good"
-.22-250 Gold Medal Neck bushing set with multiple bushings "very good to excellent condition" $125 or best offer
-Small Base .3006 FL die set, need decamping stem "good" $15
-FL .30-06 2 die set "good" $20
-Seater die only .30-06 "good" $10
-FL 2 die set .30-06 "good" $22
-FL .270 Win 2 die very good $25
-FL .280 Rem 2 die new manufactured "AS NEW" $35
-3 die set .38 Special (non carbide) "very good/good" $25
-3 die set .357 Mag (non carbide) "very good" $25
-3 die .357 Mag SWC Older Carbide set "very good" $35
-3 die .44 Sp/Mag (non carbide) "very good, nice" $28
-FL 7MM ULTRA MAG, some rust spots outside, inside looks good "fair" $20
-older 3 die .44 Mag non carbide set (no box) good $20
-Primer Pocket Swager Combo, great shape, one of the stems is bent but would be under warranty $34

LEE
-2 die FL .220 Swift "excellent" $22
-factory crimp die 7.7 Japanese "excellent" $15
-3 die 7mm Rem Mag deluxe "fair to good" $10 SPF
-3 die .243 Win "good to very good" no box $20 SPF
-6mm Rem 3 die with Factory Crimp die "very good/Exc" $28
-.357 Mag Carbide 3 die with shell holder and spoon "very good/excellent" $35
-.41 Mag Carbide 3 die with shell holder "very good" $26
-.270 Win 2 die "excellent" $24
-.17 Rem with shell holder 2 die $24
-.25-06 3 die with factory crimp die "very good" $24 SOLD
-.357 Expander die $5 "good"

Pacific/CH
-CH .375 H&H 2 die set "very good" $22
-CH .44 Special Sizer and Seater dies "very good" $20
-Pacific .30-06 Durachrome "good" lock rings have some surface rust and marring $18
-Pacific Chrome Plated .264 Win Mag "very good" 2 die $24
-Pacific Chrome Plated .300 Win Mag "fair" they're not too bad but looks like it could be missing parts $15

SOLD MEC Charge Bar lot of 9 (16 ga #2, #4A, 20ga #2, 12 ga #'s 0, 1, 2, 8G, 11, and 12)
$5 each Or buy all for $20

-Case Trimmer Cutter Shafts Forester Hand Trimmer $10 each
-RCBS Burring tool "good" (2 avail) $8 1 SPF
-Forester Burring Tool "good" $7
-RCBS Uniflow Powder Nozzle $5/each
-RCBS Uniflow Lg and small Powder nozzle $10
-case puller appears to be RCBS $20
-RCBS 4x4 Shell Plate $40 each (#3 and #6)
-NEW Hornady Shell holder (3x #14, 1x #2) $5 each
-Lee Hand Primer Tool Shell Holder set $20 (12 Shell holders)
-Lee Auto Primer shell holders $2 each (#1,2,3,11)
-RCBS Lock Rings $4 each as new
-RCBS Primer arm $10 each, from JR3

-SPF Lyman .270 Case Gauge "very good" $15
-like new RCBS Powder Trickler $20
-Lee Safety Powder Scale looks new $15
-RCBS Dial Caliper as new $20 SOLD
-RCBS Dial Caliper $10 SOLD

 

[Dgod]

I'll take the following;
44 Mag Lyman Dies
Lyman 38 Spc Dies

Thanks

 

[G19Jeeper]

More added

 

[44ron85]

I'll take the 2 dial calipers, pm me info

 

[G19Jeeper]

I'll take the 2 dial calipers, pm me info

You don't have enough posts for PM privileges yet.

 

[44ron85]

My Pm seems to be working now.

 

[G19Jeeper]

Bump

 

[Dgod]

Add the 357 sizer to my list, please

 

[G19Jeeper]

Add the 357 sizer to my list, please

The Lyman seater for $8 you mean?

 

[Dgod]

Yup

 

[Willoughby]

Ill take
-3 die 7mm Rem Mag deluxe "fair to good" $10
mec charge bars --all 9
and calipers if available
sending pm

 

[Nomad8961]

Could I get a picture of the 243 die set? Also are the trimmer arbors for rcbs or will they fit a forester trimmer?

 

[G19Jeeper]

Could I get a picture of the 243 die set? Also are the trimmer arbors for rcbs or will they fit a forester trimmer?

I have two sets of Arbors that were listed here
-RCBS .153" shank 9 piece set includes .22/.24/.25/.27/.28/.30/.35/.44/.45 calibers for $25
-.136" Shank diameter (I believe the Lymans are smaller) 9 piece includes .22/.24/.27/.28/.30/.35/9mm/.44/.45 also for $25

 

[G19Jeeper]

Here is a photo of the .243 Lee dies, including FCD