Putting this out there to see if there is any interest. Custom Blue printed Remington 700 LA with 28" Bartlein Fluted Barrel. Threaded 5/8x24. This is in a KRG Bravo with Arca rail, and sports a Timney HIT trigger. This gun also comes with the original B&C Stock and Hard case. I also have, more than, several hundred rounds of new and Twice fired Lapua brass ( havent made a total count). Competition full lenght Die set and a Wilson Micrometer Arbor seating die. I have got all loads under .5 except Berger 156 EOL. I cant get them to shoot better than .68. Need to try something other than Retumbo for that bullet. I installed an EC Tuner, after load development with Berger 140 VLD, and shot a 1 hole, 3 round group i cant measure.
I am not the original owner. I was told it had less than 50 rounds when I bought it. Chamber was like new. I put 152 rounds through it.
This is a Justin Custom. (I was told) this is Justin Sip of , J Sip and Sons Custom Guns of Utah.
Much more I wont get into. I am selling because im building a 300 PRC. I am also looking for tier one glass to put on that build and would absolutely make a deal with glass included to help offset cost. I am specifically looking for one of the following:
ATACR 4-20x50 f1 Mil
ATACR 5-25x50 f1 Mil
NX8 in 20 or above Mil
USO FDN 5-25 Mil
S&B PMII 3-20 Mil
Leupold Mark 5HD 5-25 Mil
Leupold Mark 8 3.5-25 Mil
I will entertain any of these scopes specifically. I am not interested in selling outright just yet. Obviously the deal will vary depending on the scope. This is just a feeler to see if anyone has a deal for me. Please PM me with what you have and your offer. The Area 419 brake does not go with the gun. I would consider leaving the Arken on it. Its certainly not tier 1 glass but gets the job done with absolute repeatability.
Many Pictures
140 VLD pre-Tuner
I am not the original owner. I was told it had less than 50 rounds when I bought it. Chamber was like new. I put 152 rounds through it.
This is a Justin Custom. (I was told) this is Justin Sip of , J Sip and Sons Custom Guns of Utah.
Much more I wont get into. I am selling because im building a 300 PRC. I am also looking for tier one glass to put on that build and would absolutely make a deal with glass included to help offset cost. I am specifically looking for one of the following:
ATACR 4-20x50 f1 Mil
ATACR 5-25x50 f1 Mil
NX8 in 20 or above Mil
USO FDN 5-25 Mil
S&B PMII 3-20 Mil
Leupold Mark 5HD 5-25 Mil
Leupold Mark 8 3.5-25 Mil
I will entertain any of these scopes specifically. I am not interested in selling outright just yet. Obviously the deal will vary depending on the scope. This is just a feeler to see if anyone has a deal for me. Please PM me with what you have and your offer. The Area 419 brake does not go with the gun. I would consider leaving the Arken on it. Its certainly not tier 1 glass but gets the job done with absolute repeatability.
Many Pictures
140 VLD pre-Tuner
Attachments
Last edited: