Joe270
Well-Known Member
Looking to upgrade the trigger assembly on my ruger American 350 legend. Pm with offers. Thanks, Joe
-
You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.
We offer multiple options to become a Supporting Member here.
SOLD/EXPIRED Timney trigger Ruger American center fire.
- Thread starter Joe270
- Start date
Help Support Long Range Hunting Forum
Dr. Vette
Well-Known Member
The stock one is easy to tweak if you so desired, and save yourself $100.
Joe270
Well-Known Member
I backed the adjustment for the pull weight all the way out. Any other tricks?
Dr. Vette
Well-Known Member
If you're comfortable talking apart the trigger, then yes.
You can use a Dremel polishing wheel and Flitz to polish the sear and trigger mating surfaces.
Trim the trigger spring to just under 0.6 inches. You don't need to go shorter.
Reassemble.
Use a Lyman trigger pull gauge to fine tune, and you can easily get a 2# pull.
You can use a Dremel polishing wheel and Flitz to polish the sear and trigger mating surfaces.
Trim the trigger spring to just under 0.6 inches. You don't need to go shorter.
Reassemble.
Use a Lyman trigger pull gauge to fine tune, and you can easily get a 2# pull.
Joe270
Well-Known Member
Thanks, I'll give that a shot.
