Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Suggested Barrel Contour
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="NesikaChad" data-source="post: 323403" data-attributes="member: 7449"><p>With a stock that has that large of a barrel channel just about anything will work.</p><p></p><p>If it were me:</p><p></p><p>I'd go with an NBRSA heavy varmint contour barrel. Typically these run in the 1.200 cylinder diameter for 3 inches and then taper to about ".980-ish" at the muzzle. A guy can go bigger with a 1.250 cylinder but I think these look a bit "Russian" when hung off the front of a Remmy.</p><p></p><p>If you visit any marquee barrel maker's website they will almost certainly have a very comprehensive chart illustrating the contours they offer. This will remove any/all doubt/questions regarding compatibility of components.</p><p></p><p>Hope this helped.</p><p></p><p></p><p>Chad</p></blockquote><p></p>
[QUOTE="NesikaChad, post: 323403, member: 7449"] With a stock that has that large of a barrel channel just about anything will work. If it were me: I'd go with an NBRSA heavy varmint contour barrel. Typically these run in the 1.200 cylinder diameter for 3 inches and then taper to about ".980-ish" at the muzzle. A guy can go bigger with a 1.250 cylinder but I think these look a bit "Russian" when hung off the front of a Remmy. If you visit any marquee barrel maker's website they will almost certainly have a very comprehensive chart illustrating the contours they offer. This will remove any/all doubt/questions regarding compatibility of components. Hope this helped. Chad [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Suggested Barrel Contour
Top