Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
Stuck Brass need some advice please
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Hugnot" data-source="post: 2876922" data-attributes="member: 115658"><p>The pound-out stuck case removers should have a long hex nut with inside threads that when turned down against the die will extract the threaded expander/primer pin rod. This will allow the press to push out a stuck case from an upside-down die using a steel rod pushed into die with stuck case.</p><p></p><p>A trip to your local hardware store to buy a drill bit, tap (size match drill), washers, & bolt (size match tap) will work. Anybody out there who has used the Frankford Arsenal stuck case remover? As good as I am, I still ger stuck cases, like <s>2-3</s> 1-2 per year.</p><p></p><p>Just guessing - using a big vise to squash a case head, the nail thru brass flash hole would prevent the case from being collapsed/formed into an elliptical shape with the ends of the ellipse jamming into the die making the extraction more difficult.</p><p></p><p>My last stuck cases happened using a Lee F/L 6mm CM die on once fired 6.5 CM cases, despite application of case lube.</p></blockquote><p></p>
[QUOTE="Hugnot, post: 2876922, member: 115658"] The pound-out stuck case removers should have a long hex nut with inside threads that when turned down against the die will extract the threaded expander/primer pin rod. This will allow the press to push out a stuck case from an upside-down die using a steel rod pushed into die with stuck case. A trip to your local hardware store to buy a drill bit, tap (size match drill), washers, & bolt (size match tap) will work. Anybody out there who has used the Frankford Arsenal stuck case remover? As good as I am, I still ger stuck cases, like [S]2-3[/S] 1-2 per year. Just guessing - using a big vise to squash a case head, the nail thru brass flash hole would prevent the case from being collapsed/formed into an elliptical shape with the ends of the ellipse jamming into the die making the extraction more difficult. My last stuck cases happened using a Lee F/L 6mm CM die on once fired 6.5 CM cases, despite application of case lube. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
Stuck Brass need some advice please
Top