Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Stiff Bolt with Reloads***Help Please**
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="GByrd" data-source="post: 1019676" data-attributes="member: 80516"><p>Hey guys,</p><p> I am having an issue with some 223 reloads in a Savage model 10. The reloads are set to spec per OAL, and all measurements I can measure are in spec...however, on closing the bolt with a dummy round there is a lot of resistance. </p><p></p><p>At first I saw rifling marks on the bullet, it was set to 2.260..I moved it back to 2.250 and it is no longer on the lands but it is still very stiff. The bullet is a Hornady 68gr BTHP, Lake City brass, lyman dies.</p><p></p><p>I colored my dummy round with a magic marker and ran it in the gun and I see no impacted areas...So I'm stumped.</p><p></p><p>If there is any other information I can give you please let me know. I have plans to go to the range tomorrow and it's an hour and a half away so I'd really like to get this fixed tonight if its possible</p><p></p><p>Thanks,</p><p>Garett</p></blockquote><p></p>
[QUOTE="GByrd, post: 1019676, member: 80516"] Hey guys, I am having an issue with some 223 reloads in a Savage model 10. The reloads are set to spec per OAL, and all measurements I can measure are in spec...however, on closing the bolt with a dummy round there is a lot of resistance. At first I saw rifling marks on the bullet, it was set to 2.260..I moved it back to 2.250 and it is no longer on the lands but it is still very stiff. The bullet is a Hornady 68gr BTHP, Lake City brass, lyman dies. I colored my dummy round with a magic marker and ran it in the gun and I see no impacted areas...So I'm stumped. If there is any other information I can give you please let me know. I have plans to go to the range tomorrow and it's an hour and a half away so I'd really like to get this fixed tonight if its possible Thanks, Garett [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Stiff Bolt with Reloads***Help Please**
Top