Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Small Base Sizing Die Issues?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Pdvdh" data-source="post: 2328082" data-attributes="member: 4191"><p>Different shell holders can cause differing case shoulder setback, with any given resizing die .</p><p></p><p>You can measure the different shell holder heights with calipers when this happens.</p><p></p><p>But you didn't say you were using different shell holders, yet you're getting different case shoulder setback. </p><p></p><p>I like Hornady Unique case lube better than Imperial. But both are good. Don't like Hornady one shot spray.</p><p></p><p>Lube your interior case necks with a Qtip and Imperial sizing wax or Hornady Unique, if the expander button is dragging on the way out of the case neck.</p><p></p><p>If you still get differing shoulder setbacks, I'd anneal the cases and see if that helps.</p><p></p><p>Case shoulder setback should be more uniform. Within 0.0005" - 0.001".</p></blockquote><p></p>
[QUOTE="Pdvdh, post: 2328082, member: 4191"] Different shell holders can cause differing case shoulder setback, with any given resizing die . You can measure the different shell holder heights with calipers when this happens. But you didn't say you were using different shell holders, yet you're getting different case shoulder setback. I like Hornady Unique case lube better than Imperial. But both are good. Don't like Hornady one shot spray. Lube your interior case necks with a Qtip and Imperial sizing wax or Hornady Unique, if the expander button is dragging on the way out of the case neck. If you still get differing shoulder setbacks, I'd anneal the cases and see if that helps. Case shoulder setback should be more uniform. Within 0.0005" - 0.001". [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Small Base Sizing Die Issues?
Top