Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sizing help needed
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="243winxb" data-source="post: 1825053" data-attributes="member: 97793"><p>This area is not going to get sized back to factory, SAAMI specifications. If expanded from repeated reloading, This is why some brass fired in an old guns chamber will not fit into a new guns chamber using the old brass.</p><p></p><p>The fl die does not size this area.</p><p>[ATTACH=full]173719[/ATTACH] </p><p>Looks like the OP has solved the sizing problem. </p><p>Press cam over or the extra 1/4 turn down of the fl die, will remove slop from the press linkage & any spring in the press.</p><p></p><p>At the top of the stroke, make sure the shell holder is in full contact with the bottom of the fl die.</p></blockquote><p></p>
[QUOTE="243winxb, post: 1825053, member: 97793"] This area is not going to get sized back to factory, SAAMI specifications. If expanded from repeated reloading, This is why some brass fired in an old guns chamber will not fit into a new guns chamber using the old brass. The fl die does not size this area. [ATTACH type="full" alt="20200204_084847.jpg"]173719[/ATTACH] Looks like the OP has solved the sizing problem. Press cam over or the extra 1/4 turn down of the fl die, will remove slop from the press linkage & any spring in the press. At the top of the stroke, make sure the shell holder is in full contact with the bottom of the fl die. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sizing help needed
Top