Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sizing help needed
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="birdiemc" data-source="post: 1824835" data-attributes="member: 29632"><p>The way I see it, the distance from the shoulder inside the die to the shell holder will be the same whether the die is screwed in 1/4 turn or 7 turns once the shell holder makes contact with the bottom of the die. That distance is fixed, so the only way to increase that distance or decrease is by using shell holders with different depths relative to the surface that meets the die. This is accomplished with the competition shell holders to lengthen headspace or a shim between the case head and shell holder to decrease headspace (i.e. bump the shoulder back)</p></blockquote><p></p>
[QUOTE="birdiemc, post: 1824835, member: 29632"] The way I see it, the distance from the shoulder inside the die to the shell holder will be the same whether the die is screwed in 1/4 turn or 7 turns once the shell holder makes contact with the bottom of the die. That distance is fixed, so the only way to increase that distance or decrease is by using shell holders with different depths relative to the surface that meets the die. This is accomplished with the competition shell holders to lengthen headspace or a shim between the case head and shell holder to decrease headspace (i.e. bump the shoulder back) [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sizing help needed
Top