Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Short range trajectory with long range rifle
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Philward" data-source="post: 1886832" data-attributes="member: 92604"><p>Was out to shoot my Rem700LR IN 7mmRM, 162g eldx at right at 3000fps. This is a load I developed for the gun for the previous owner. I was seeing it after changing scope bases and installing in new stock from Stockys stocks. At 50yds I was 3/4" left and perfect for elevation so I adjusted windage of the rear base but went a little too far so back just a smidge. Went to 112yds and fired 3 and they were all in the bull, elevation right on. Typically if I'm good at 35-50 I'm 1-2" high at 100. All but a couple of my toggles are 22" barrels and the others are only 24". Need to try at longer range 2-300yds for sure. Is there a difference in trajectory with 26" barrels at shorter range, hard to believe the bullet is dropping past the zero point already at 100. Or that it isn't climbing still at that point. But maybe I'm not thinking this through and even if I raised the POI at 100 to 1.5" high it would still be dead on at 50. Won't be dialing this scope, it will be set for a 250 yd zero and stay there 90% of time. Maybe dial for targets for fun. No competition or hunting (too heavy to haul around).</p></blockquote><p></p>
[QUOTE="Philward, post: 1886832, member: 92604"] Was out to shoot my Rem700LR IN 7mmRM, 162g eldx at right at 3000fps. This is a load I developed for the gun for the previous owner. I was seeing it after changing scope bases and installing in new stock from Stockys stocks. At 50yds I was 3/4" left and perfect for elevation so I adjusted windage of the rear base but went a little too far so back just a smidge. Went to 112yds and fired 3 and they were all in the bull, elevation right on. Typically if I'm good at 35-50 I'm 1-2" high at 100. All but a couple of my toggles are 22" barrels and the others are only 24". Need to try at longer range 2-300yds for sure. Is there a difference in trajectory with 26" barrels at shorter range, hard to believe the bullet is dropping past the zero point already at 100. Or that it isn't climbing still at that point. But maybe I'm not thinking this through and even if I raised the POI at 100 to 1.5" high it would still be dead on at 50. Won't be dialing this scope, it will be set for a 250 yd zero and stay there 90% of time. Maybe dial for targets for fun. No competition or hunting (too heavy to haul around). [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Short range trajectory with long range rifle
Top