Cleaning out my stash a bit, need to pay off some bills. All fit Savage small shank. Add $25 to listed prices for USPS priority S&H.
Numbered from top down.
#1. Savage 112 300WM 26" fluted, .810" at recessed crown, off a BVSS model with Black Nitride finish (stainless steel original finish). 100 rounds down the tube before Nitride processing, zero rounds since. Barrel shot groups for me under half in no problem and even have a few pics of groups under 1/4" with hand loads. Barrel will be even better now with Nitride finish. $225.00
#2. CBI 243, 8 twist, 26" and .810" at recessed crown, Varmint contour, less then 50 rounds before Black Nitride processed (stainless steel original finish), zero rounds since. $285.00
#3. 6.5x55, 8 twist, 26" varmint contour .800" at tip with 11 degree cut crown, X-Caliber blank chambered by AGW Zero rounds, unfired, brand new! $299.00
#4. 243AI, 8 twist, 30" straight taper to .830" at the tip with 11 degree cut crown, X-Caliber blank chamber by AGW (requested no stamping of barrel at chamber end because at the time the stamps where displacing the metal a bit more then necessary possibly into the chamber). $315.00
#5. Savage 22-250 model 12, 26" fluted, .890" at tip with recessed crown, 12 twist. Was told low round count. When purchased and I put less then 100 rounds threw it threw it, Shot great, I just shoot the 223 rem more and just don't need 22-250 power. $165.00
#6. Same as #5 with same low round count. Savage 22-250 model 12, 26" fluted, .890" at tip with recessed crown, 12 twist. Was told low round count. When purchased and I put less then 100 rounds threw it threw it, Shot great, I just shoot the 223 rem more and just don't need 22-250 power. $165.00
#7. 35 Whelen AI, 28" heavy sporter contour, X-caliber blank chamber by AGW, .690" at tip with 11 degree crown, only 10 rounds fired, might as well be brand new. Nice light weight yet lots of potential power from this awesome looking round. CH-4d custom die set available too if needed. $315.00
#8. New Savage unmarked 300WM from Numrich back in the day when they would moved these barrels. Stainless steel, heavy sporter contour 26" .700" at tip. $150.00
#9. Stevens chrome moly 300WM, 24" sporter contour. Barrel was hand lapped with care to remove the "train track" texture of the rifling then sent off to be Black Nitride processed. Less then 200 rounds fired before nitride, haven't fired since. Rifling looks great now. $125.00
#10. An AGW original! His 500-375R, He stamped it the "50 HPDT" and I think it has been referred to as the 500 thumper. I shot 350 grain bullets with a full case of trailboss at FPS greater then that achievable from the 500 S&W and was quite happy with the performance. Never did try a full power load to see it's full potential. Barrel is 20" long with a 20 twist. It is .875" in diameter at the tip with 11 degree crown. It is not that heavy at all because of the large .500" diameter bore. I have some brass available should buyer wish to purchase. $250.00
More pics to come.
I am happy to accept any form of payment including money order, check, paypal or credit card over the phone. I own and operate BTSniper Custom bullet swage dies, feel free to research a bit to rest assured you can buy with confidence.
Brian
BTSNIPER llc.
541-436-4095
[email protected]
Numbered from top down.
#1. Savage 112 300WM 26" fluted, .810" at recessed crown, off a BVSS model with Black Nitride finish (stainless steel original finish). 100 rounds down the tube before Nitride processing, zero rounds since. Barrel shot groups for me under half in no problem and even have a few pics of groups under 1/4" with hand loads. Barrel will be even better now with Nitride finish. $225.00
#2. CBI 243, 8 twist, 26" and .810" at recessed crown, Varmint contour, less then 50 rounds before Black Nitride processed (stainless steel original finish), zero rounds since. $285.00
#3. 6.5x55, 8 twist, 26" varmint contour .800" at tip with 11 degree cut crown, X-Caliber blank chambered by AGW Zero rounds, unfired, brand new! $299.00
#4. 243AI, 8 twist, 30" straight taper to .830" at the tip with 11 degree cut crown, X-Caliber blank chamber by AGW (requested no stamping of barrel at chamber end because at the time the stamps where displacing the metal a bit more then necessary possibly into the chamber). $315.00
#5. Savage 22-250 model 12, 26" fluted, .890" at tip with recessed crown, 12 twist. Was told low round count. When purchased and I put less then 100 rounds threw it threw it, Shot great, I just shoot the 223 rem more and just don't need 22-250 power. $165.00
#6. Same as #5 with same low round count. Savage 22-250 model 12, 26" fluted, .890" at tip with recessed crown, 12 twist. Was told low round count. When purchased and I put less then 100 rounds threw it threw it, Shot great, I just shoot the 223 rem more and just don't need 22-250 power. $165.00
#7. 35 Whelen AI, 28" heavy sporter contour, X-caliber blank chamber by AGW, .690" at tip with 11 degree crown, only 10 rounds fired, might as well be brand new. Nice light weight yet lots of potential power from this awesome looking round. CH-4d custom die set available too if needed. $315.00
#8. New Savage unmarked 300WM from Numrich back in the day when they would moved these barrels. Stainless steel, heavy sporter contour 26" .700" at tip. $150.00
#9. Stevens chrome moly 300WM, 24" sporter contour. Barrel was hand lapped with care to remove the "train track" texture of the rifling then sent off to be Black Nitride processed. Less then 200 rounds fired before nitride, haven't fired since. Rifling looks great now. $125.00
#10. An AGW original! His 500-375R, He stamped it the "50 HPDT" and I think it has been referred to as the 500 thumper. I shot 350 grain bullets with a full case of trailboss at FPS greater then that achievable from the 500 S&W and was quite happy with the performance. Never did try a full power load to see it's full potential. Barrel is 20" long with a 20 twist. It is .875" in diameter at the tip with 11 degree crown. It is not that heavy at all because of the large .500" diameter bore. I have some brass available should buyer wish to purchase. $250.00
More pics to come.
I am happy to accept any form of payment including money order, check, paypal or credit card over the phone. I own and operate BTSniper Custom bullet swage dies, feel free to research a bit to rest assured you can buy with confidence.
Brian
BTSNIPER llc.
541-436-4095
[email protected]
Last edited:
