Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
reloading mistake
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="sport20" data-source="post: 1014651" data-attributes="member: 83943"><p>hi</p><p>i'm new to reloading and have been doing alot of research, so i ended up buying the rockchucker supreme kit by rcbs. any way in my speer book which came with it my load data for 22-250 using h4895 was a min of 34 grains and a max of 38 grains.</p><p>i've seen what other people have been using so i started with the following</p><p></p><p></p><p>winchester casings . cci 200 primers 60 gr. v-max bullets 36 grains of h4895.</p><p>winchester casings . cci 200 primers 60 gr. v-max bullets 37 grains of h4895.</p><p>winchester casings . cci 200 primers 60 gr. v-max bullets 38 grains of h4895.</p><p>all 3 load groups were .020" off the lands</p><p>savage axis </p><p></p><p>i shot off the 36 grains. all ok</p><p>then 37 grains,ok but noticed some marks on end of casing.(afterwards)</p><p>then i tried the 38 grains and i could smell powder alot more. when i tried to eject shell i couldn't get it out. after prying the bolt up it came out with some difficulty. primer was completley gone. did this twice with much same results because i'm hard headed. i know oviously it was to big of a load, but i didn't think this would happen if it was listed in the book. can anyone see what i did wrong for this to happen.</p></blockquote><p></p>
[QUOTE="sport20, post: 1014651, member: 83943"] hi i'm new to reloading and have been doing alot of research, so i ended up buying the rockchucker supreme kit by rcbs. any way in my speer book which came with it my load data for 22-250 using h4895 was a min of 34 grains and a max of 38 grains. i've seen what other people have been using so i started with the following winchester casings . cci 200 primers 60 gr. v-max bullets 36 grains of h4895. winchester casings . cci 200 primers 60 gr. v-max bullets 37 grains of h4895. winchester casings . cci 200 primers 60 gr. v-max bullets 38 grains of h4895. all 3 load groups were .020" off the lands savage axis i shot off the 36 grains. all ok then 37 grains,ok but noticed some marks on end of casing.(afterwards) then i tried the 38 grains and i could smell powder alot more. when i tried to eject shell i couldn't get it out. after prying the bolt up it came out with some difficulty. primer was completley gone. did this twice with much same results because i'm hard headed. i know oviously it was to big of a load, but i didn't think this would happen if it was listed in the book. can anyone see what i did wrong for this to happen. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
reloading mistake
Top