Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
R26 & 264 wm anyone?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Rhett Crider" data-source="post: 1421514" data-attributes="member: 105034"><p>Hello everyone. Name is Rhett and I'm new to LRH. First, I would like to thank everyone on this forum for a lot of good information over the years I've kept up w/ it. Lot of knowledge and experience seems to come from here.</p><p>As to the 264WM load, I built mine last year and through my load development, my go to load is with Retumbo. Running a Bartlein 26" 3B w/ 8 twist and w/ 143 ELDX my COAL at .025 off lands is 3.340(CBTO is 2.700). I live in Houston, Texas so the temp was in the high 80's. My final load that gave me 1/4 MOA at 200 yd sight in was;</p><p>Winchester brass, WLRM primers, 68.3G Retumbo, 143G ELDX. Average MV was 3020. According to Quickloads, 99.3% fill capacity. I had no pressure signs w/ this load.</p><p>Hope this helps and thanks again for all the good info.</p></blockquote><p></p>
[QUOTE="Rhett Crider, post: 1421514, member: 105034"] Hello everyone. Name is Rhett and I'm new to LRH. First, I would like to thank everyone on this forum for a lot of good information over the years I've kept up w/ it. Lot of knowledge and experience seems to come from here. As to the 264WM load, I built mine last year and through my load development, my go to load is with Retumbo. Running a Bartlein 26" 3B w/ 8 twist and w/ 143 ELDX my COAL at .025 off lands is 3.340(CBTO is 2.700). I live in Houston, Texas so the temp was in the high 80's. My final load that gave me 1/4 MOA at 200 yd sight in was; Winchester brass, WLRM primers, 68.3G Retumbo, 143G ELDX. Average MV was 3020. According to Quickloads, 99.3% fill capacity. I had no pressure signs w/ this load. Hope this helps and thanks again for all the good info. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
R26 & 264 wm anyone?
Top