Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Powder issues
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="baldhunter" data-source="post: 2856653" data-attributes="member: 11853"><p>[USER=108576]Old rooster[/USER],you mentioned ejector marks on the Lapua brass.I ran into that issue with Norma brass in my 308 Norma Magnum.I made some brass out of Remington 7mag and Winchester 338 Win Mag brass before I got my Norma brass.I was working on my loads with the brass I made,but when I shot those loads in the Norma brass,I was getting loose primer pockets after the first firing.I had to drop my loads down about 1.5-2.0grs because the brass was just too soft at the case head.I never had a single issue with loose primer pockets with the Winchester or Remington brass.</p></blockquote><p></p>
[QUOTE="baldhunter, post: 2856653, member: 11853"] [USER=108576]Old rooster[/USER],you mentioned ejector marks on the Lapua brass.I ran into that issue with Norma brass in my 308 Norma Magnum.I made some brass out of Remington 7mag and Winchester 338 Win Mag brass before I got my Norma brass.I was working on my loads with the brass I made,but when I shot those loads in the Norma brass,I was getting loose primer pockets after the first firing.I had to drop my loads down about 1.5-2.0grs because the brass was just too soft at the case head.I never had a single issue with loose primer pockets with the Winchester or Remington brass. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Powder issues
Top