Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Long Range Scopes and Other Optics
NXS zero stop problem
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Broz" data-source="post: 1012135" data-attributes="member: 7503"><p>The proper way to zero is to loosen the 4 screws. Then using the tool to match the center shaft (flat blade or allen) turn the center shaft until you have the rifle zeroed. Then , rotate the zero stop clutch clockwise until it stops. Tighten the 4 screws making sure not to allow the center shaft to move. Replace the turret cap, turn to align with zero, and tighten the 2 allen cap screws.</p><p> </p><p>If you are not getting clicks when you turn the center turret shaft with a tool in both directions with the 4 screws loose then something is wrong and I recommend you call Nightforce for advice.</p><p> </p><p>Jeff</p></blockquote><p></p>
[QUOTE="Broz, post: 1012135, member: 7503"] The proper way to zero is to loosen the 4 screws. Then using the tool to match the center shaft (flat blade or allen) turn the center shaft until you have the rifle zeroed. Then , rotate the zero stop clutch clockwise until it stops. Tighten the 4 screws making sure not to allow the center shaft to move. Replace the turret cap, turn to align with zero, and tighten the 2 allen cap screws. If you are not getting clicks when you turn the center turret shaft with a tool in both directions with the 4 screws loose then something is wrong and I recommend you call Nightforce for advice. Jeff [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Long Range Scopes and Other Optics
NXS zero stop problem
Top