Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Need help with approx MV of load -- QuickLoad???
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="B23" data-source="post: 720811" data-attributes="member: 13222"><p>Not knowing you're loaded length and using the default cartridge length of 2.825 it should be around 2984fps but it also shows it as being a pretty hot load at 75,607PSI which is 10,000 PSI over recommended max. This will change, go down, if your OAL is longer than 2.825 as long as it isn't touching the lans. You're also only using a large rifle primer and I believe the QL information for the the 7SAUM is based off using a Magnum large rifle primer so your peak chamber pressure would likely be less than 75K.</p></blockquote><p></p>
[QUOTE="B23, post: 720811, member: 13222"] Not knowing you're loaded length and using the default cartridge length of 2.825 it should be around 2984fps but it also shows it as being a pretty hot load at 75,607PSI which is 10,000 PSI over recommended max. This will change, go down, if your OAL is longer than 2.825 as long as it isn't touching the lans. You're also only using a large rifle primer and I believe the QL information for the the 7SAUM is based off using a Magnum large rifle primer so your peak chamber pressure would likely be less than 75K. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Need help with approx MV of load -- QuickLoad???
Top