Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Neck sizing and turning order (stupid question)
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="DUSTY NOGGIN" data-source="post: 1662079" data-attributes="member: 89550"><p>trim case to length so the stop on the pilot makes the case stop all at the same point. close to the shoulder corner</p><p></p><p>on #1 .. cant say for sure of your measurements.. but you need an expander that after spring back leaves about 1 thou of clearance.. the pilot is piloting the brass .. your brass should slide over the turnier pilot easily.. and not be able to wobble at the case head ( or its too loose )</p><p></p><p>i dont do number 4. i just bush down to 3 less the bullet diameter ...</p><p></p><p>you may want to anneal somewhere during the process</p></blockquote><p></p>
[QUOTE="DUSTY NOGGIN, post: 1662079, member: 89550"] trim case to length so the stop on the pilot makes the case stop all at the same point. close to the shoulder corner on #1 .. cant say for sure of your measurements.. but you need an expander that after spring back leaves about 1 thou of clearance.. the pilot is piloting the brass .. your brass should slide over the turnier pilot easily.. and not be able to wobble at the case head ( or its too loose ) i dont do number 4. i just bush down to 3 less the bullet diameter ... you may want to anneal somewhere during the process [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Neck sizing and turning order (stupid question)
Top