Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Model 700 extraction issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Washam71418" data-source="post: 1533714" data-attributes="member: 108009"><p>Ok, so I'm sure there are 2 issues. The once fired shell not wanting to chamber was solved by screwing my die down another 1/4 turn for a total of 1/2 turn past contact with the shellholder with ram extended. It doesn't cam all the way over but it was enough to make the cases chamber and extract as they should. The issue of extraction after initial firing looks to be a primary extraction problem. From what I can tell the cam surfaces don't even touch when the bolt is lifted. With the bolt down there should be a max of .010 clearance between the front of the handle and the back of the action, mine is about .014. I guess I'll just have a Smith fix that. I'd rather not deal with Remington.....</p></blockquote><p></p>
[QUOTE="Washam71418, post: 1533714, member: 108009"] Ok, so I’m sure there are 2 issues. The once fired shell not wanting to chamber was solved by screwing my die down another 1/4 turn for a total of 1/2 turn past contact with the shellholder with ram extended. It doesn’t cam all the way over but it was enough to make the cases chamber and extract as they should. The issue of extraction after initial firing looks to be a primary extraction problem. From what I can tell the cam surfaces don’t even touch when the bolt is lifted. With the bolt down there should be a max of .010 clearance between the front of the handle and the back of the action, mine is about .014. I guess I’ll just have a Smith fix that. I’d rather not deal with Remington..... [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Model 700 extraction issue
Top