Manners Stock - PRICE REDUCED

[Far North Hunter]

PRICE REDUCEDI've had this new Manners mini chassis long action for a couple years, I don't have the full spec sheet, purchased on this site. Today I went to make an assembly, just don't like the palm swell. You can see the front pic rail and flush mount cups on the left side and one on the bottom of butt stock. One inch decelerator pad. The barrel cut is also pictured, right at 1" at the muzzle. Not completely sure of bottom cut. A std REM long action fits flush with a space in the back, see pic. The bottom metal pictured fits perfectly and fills that opening Is also pictured. $690 shipped conus. Add $150 if you'd like the bottom metal with spring and box. Check preferred, or ppal-f&f. PM me.

 

[kaseyfied]

So it looks like that was opened up to m5 metal fromthe pictures?

 

[Far North Hunter]

So it looks like that was opened up to m5 metal fromthe pictures?

 

[bsnyder]

Kasey you're not helping me at all I need a temp stock for the wife's 7 prc while I wait for the gun werks she ordered. Hers is m5….

 

[kaseyfied]

Dooooo it.. its PERRRRFFFECT

 

[bsnyder]

For a temp stock yes. We are talking about it as I type this.

 

[Tucker65]

That doesn't look like an M5 inlet. The front of it has straight cut sides where on an M5 the sides are tapered. I've seen a couple of Manners stocks where the inlet had about an 1/8" recess for the floor plate to sit in to. It looks like this was cut that way and then modified later. Might be possible to open it up to an M5 inlet and clean up everything there.

 

[Far North Hunter]

That doesn't look like an M5 inlet. The front of it has straight cut sides where on an M5 the sides are tapered. I've seen a couple of Manners stocks where the inlet had about an 1/8" recess for the floor plate to sit in to. It looks like this was cut that way and then modified later. Might be possible to open it up to an M5 inlet and clean up everything there.

Tucker you are correct. It was cut for a std Rem BDL bottom metal. The bottom metal and box are pictured, the bottom metal could accommodate a longer box. Do you recognize the brand of bottom metal?