Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Little help with 30-06ai please
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="slikmrc" data-source="post: 2132566" data-attributes="member: 116436"><p>I was working on some 06 AI loads today so I took an AOL of a 215 berger at the lands. Got 3.352 in my chamber, bottom of boatail was at the shoulder body junction. Rough measurement was about .045 above the neck shoulder junction for the bearing surface of the bullet. I run 165's in this rifle so can't help you with powder or velocity for the heavier bullets. Hope this helps, this is a standard AI chamber,if there is such a thing.</p></blockquote><p></p>
[QUOTE="slikmrc, post: 2132566, member: 116436"] I was working on some 06 AI loads today so I took an AOL of a 215 berger at the lands. Got 3.352 in my chamber, bottom of boatail was at the shoulder body junction. Rough measurement was about .045 above the neck shoulder junction for the bearing surface of the bullet. I run 165's in this rifle so can't help you with powder or velocity for the heavier bullets. Hope this helps, this is a standard AI chamber,if there is such a thing. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Little help with 30-06ai please
Top