K&M - Controlled Depth Tapered Reamer

[Bwhittty]

Hello All,

I have the following for sale:

• K&M Controlled Depth Tapered Reamer
  • 6mm - .338
  • Brand New Never Used

The K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even cut.

$40 Shipped UPS Ground/USPS - CONUS

Thanks
Brett

 

[Bwhittty]

TTT

 

[Lrreloader]

Pmed

 

[Bwhittty]

Pmed

SPF to

Lrreloader​