Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
I'm looking for advice on loading .30-06
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="philipbrousseau" data-source="post: 1203255" data-attributes="member: 94119"><p>is this an off the shelf rifle,the reason i ask is the bolt face is a good place to look for psi indications. working up loads my advice is use sierra bullets, federal 210 primers and the h4350 would be my first choice powder. same lot brass. start at .010 off the lands with a starting charge of powder and work up watching pressure and group size. i've seen the last grain increase in powder shrink groups from 1&1/4 to half inch. what is your intended use for the rifle and what model is it if you don't mind my asking? the 4350 powders are fine for 150gr. weight bullets.</p></blockquote><p></p>
[QUOTE="philipbrousseau, post: 1203255, member: 94119"] is this an off the shelf rifle,the reason i ask is the bolt face is a good place to look for psi indications. working up loads my advice is use sierra bullets, federal 210 primers and the h4350 would be my first choice powder. same lot brass. start at .010 off the lands with a starting charge of powder and work up watching pressure and group size. i've seen the last grain increase in powder shrink groups from 1&1/4 to half inch. what is your intended use for the rifle and what model is it if you don't mind my asking? the 4350 powders are fine for 150gr. weight bullets. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
I'm looking for advice on loading .30-06
Top