Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Help with new magneto speed numbers
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Tac-O" data-source="post: 1919891" data-attributes="member: 109994"><p>Sorry about that, I edited and added picture of my info.</p><p></p><p>Barrel was previously fouled. Haven't annealed cases. Jump is probably about 0.030 at this point. 400 rounds through the gun and I set the cbto to give 0.015 jump after 25 Rd break in was done. The flash holes were uniformed on the 62.4gr group, but not the 60.4gr group. Both group around 0.75". I had the thicker spacer on the bayonet and the strap and screw tightened all the way. I noticed the bayonet had moved forward about 1/4" over the first 9 shots and so I moved it back into place for the second group. Mine didn't come with a black spacer bar. Eyeballing it with my rod in the bore it looked to have correct spacing.</p></blockquote><p></p>
[QUOTE="Tac-O, post: 1919891, member: 109994"] Sorry about that, I edited and added picture of my info. Barrel was previously fouled. Haven't annealed cases. Jump is probably about 0.030 at this point. 400 rounds through the gun and I set the cbto to give 0.015 jump after 25 Rd break in was done. The flash holes were uniformed on the 62.4gr group, but not the 60.4gr group. Both group around 0.75". I had the thicker spacer on the bayonet and the strap and screw tightened all the way. I noticed the bayonet had moved forward about 1/4" over the first 9 shots and so I moved it back into place for the second group. Mine didn't come with a black spacer bar. Eyeballing it with my rod in the bore it looked to have correct spacing. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Help with new magneto speed numbers
Top