Hart 7mm Rem Mag Takeoff

Discussion in 'Sold/Expired' started by jayjay24, Jul 7, 2018.

  1. jayjay24

    jayjay24 Well-Known Member

    Messages:
    204
    Joined:
    Jan 10, 2015
    Hart #4.5 contour, straight fluted, matte stainless barrel takeoff. It’s chambered in 7mm Rem Mag and has had less than 100 rounds down the tube. The action previously threaded to is a Borden Timberline which has a 1 1/16” x 18 TPI threading. The barrel will also come with the seamless Vais Radial Brake and measures 26.5” in length with the brake attached. $300 shipped. Thanks!
     

    Attached Files:

    joseph singleton likes this.
  2. cahunter805

    cahunter805 Well-Known Member

    Messages:
    319
    Joined:
    Jun 18, 2010
    What twist rate?
     
    trailrider121 likes this.
  3. jayjay24

    jayjay24 Well-Known Member

    Messages:
    204
    Joined:
    Jan 10, 2015
    1/9. Loaded for 168 Bergers and 168 ABLR
     
  4. 6x6 elk

    6x6 elk Well-Known Member

    Messages:
    253
    Joined:
    Dec 5, 2013
    How did it shoot? Thanks
     
  5. jayjay24

    jayjay24 Well-Known Member

    Messages:
    204
    Joined:
    Jan 10, 2015
    Shot less than 1/2 MOA during load development and I’ve shot it maybe 20-25 times since then. Good groups when I shot it too. I’ve just got a hankering for a 28 Nosler on a Proof tube loaded for the 195’s
     
  6. NMElkSlayer

    NMElkSlayer Well-Known Member

    Messages:
    123
    Joined:
    May 5, 2009
    What's the weight?
     
  7. jayjay24

    jayjay24 Well-Known Member

    Messages:
    204
    Joined:
    Jan 10, 2015
    It’s still on the rifle because I didn’t wanna jerk it off if I didn’t get any interest. If someone wants it, I’m gonna ship it to my smith so he can take it off, clean it really good and ship it out. I would say the barrel weighs around the 3-3.5# mark. Hart advertises a #5 contour weighs 4# and this one measures more like a #4 contour at the muzzle and it’s fluted
     
  8. jayjay24

    jayjay24 Well-Known Member

    Messages:
    204
    Joined:
    Jan 10, 2015
    I also have loaded rounds and a Leupold CDS custom turret that could added to the barrel. The gunsmithing was done by Michael Deloach, owner and operator of Nine Run Gun in Screven, GA. He builds em one at a time and his attention to detail is second to none in my opinion. He’s built two for me and several for my close friends.
     
    Last edited: Jul 9, 2018
  9. jayjay24

    jayjay24 Well-Known Member

    Messages:
    204
    Joined:
    Jan 10, 2015
    $275 shipped