Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Going Back To Where I Started........... Kinda
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="ButterBean" data-source="post: 2842005" data-attributes="member: 41385"><p>Well I finally got time to do some fire forming and some load work up on two bullets, 35g HH and the 52g HH, I will go ahead and tell you I made a mistake on the twist rate@ 7.0, as slick as the Hammers are 4770 is all I can get out of the 52g HH safely in my rig, the twist is just to tight had it been a 9 twist I feel sure I would have made 5K.</p><p> The 35 made it to 5138 safe in my rig, load work up was done with 3 shots for each bullet, ended up at 64g of H 4350 with the 35 and 62g of H4350 with the 52's. Both with CCI 200's</p><p> I have 51AH' and 44g HH's on the way to test, a little disappointed in myself but I'll take it regardless, no crimp on these loads as I have sent 5 cases to LEE for dies to be made, both loads followed standard Hammer load development trends, all six shots were sub 3/4 Moa. </p><p>More to come when I can get to it </p><p> Bean</p></blockquote><p></p>
[QUOTE="ButterBean, post: 2842005, member: 41385"] Well I finally got time to do some fire forming and some load work up on two bullets, 35g HH and the 52g HH, I will go ahead and tell you I made a mistake on the twist rate@ 7.0, as slick as the Hammers are 4770 is all I can get out of the 52g HH safely in my rig, the twist is just to tight had it been a 9 twist I feel sure I would have made 5K. The 35 made it to 5138 safe in my rig, load work up was done with 3 shots for each bullet, ended up at 64g of H 4350 with the 35 and 62g of H4350 with the 52’s. Both with CCI 200’s I have 51AH’ and 44g HH’s on the way to test, a little disappointed in myself but I’ll take it regardless, no crimp on these loads as I have sent 5 cases to LEE for dies to be made, both loads followed standard Hammer load development trends, all six shots were sub 3/4 Moa. More to come when I can get to it Bean [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Going Back To Where I Started........... Kinda
Top