backwoods83
Well-Known Member
- Joined
- Jan 8, 2011
- Messages
- 3,451
Aero Precision M5 upper and lower.
Aero handguard.
Magpul Gen3 PRS.
KAK 5.7oz buffer.
Tubbs flat wire spring.
Toolcraft nitride bolt carrier.
JP high pressure bolt.
Strike Industries charging handle.
Battle Arms ambi safety.
Triggertec AR Special 2 stage. Strike Industries takedown/pivot pins.
Aero small parts kit.
Ergo palm shelf grip.
Superlative Arms adjustable gas block.
WOA rifle +2 gas tube.
Mcgowen 26" Socom-ish contour, 1" to the .875" gas journal, which is rifle +2 gas, then tapering to .830" behind the 5/8-24 threaded muzzle.
Recoil Technologies muzzle brake.
Roughly 300rnds fired, has seen almost 3100fps with 155s and Leverevolution or CFE223, in non OCD small primer Alpha brass, CCI 450 primers, never any over pressure to speak of, minor ejector marks, nothing out of the ordinary for a gas gun. The load I settled on, is Sierra 2156s at 2.830", which fits all mags, that Alpha brass, CCI 450s, and 45.8grns of H4895, velocity of 2982fps ES 12-14 SD 5-6, .25-.45" rifle, if you can manage an AR10, they can be tricky. Hold has to be spot on.
Scope is an Arken EP5 5-25 with all the accessories and in a 20moa Arken mount.
$1250.00 rifle only.
$1650.00 rifle and scope.
I rarely shoot my AR15s, and this AR10 never gets used, hasn't been fired since load development. I'd rather free up the funds for other things.
Some other things I'd take on trade. Timney HIT trigger for M700, Berger 108 Elite hunters, Berger 153.5 LRHTs, Berger 85.5s, Berger 180 hybrids, Berger 184 F open hybrids, Hornady 180 ELDMs, Berger 208 LRHTs, Berger 144 LRHTs. Hornady 7mm PRC die set. Sightron S6 5-30 or SVIII 5-40 both in mrad. Cash on either end of course. Also an MDT LSS Premier for a long action 700 or clone. Savage style prefit in 6ARC or 6mm Grendel 26" plus. Open to 6mm, 6.5, 7, and 30 cal blanks at least 28" finish length and MTU or heavier.
Aero handguard.
Magpul Gen3 PRS.
KAK 5.7oz buffer.
Tubbs flat wire spring.
Toolcraft nitride bolt carrier.
JP high pressure bolt.
Strike Industries charging handle.
Battle Arms ambi safety.
Triggertec AR Special 2 stage. Strike Industries takedown/pivot pins.
Aero small parts kit.
Ergo palm shelf grip.
Superlative Arms adjustable gas block.
WOA rifle +2 gas tube.
Mcgowen 26" Socom-ish contour, 1" to the .875" gas journal, which is rifle +2 gas, then tapering to .830" behind the 5/8-24 threaded muzzle.
Recoil Technologies muzzle brake.
Roughly 300rnds fired, has seen almost 3100fps with 155s and Leverevolution or CFE223, in non OCD small primer Alpha brass, CCI 450 primers, never any over pressure to speak of, minor ejector marks, nothing out of the ordinary for a gas gun. The load I settled on, is Sierra 2156s at 2.830", which fits all mags, that Alpha brass, CCI 450s, and 45.8grns of H4895, velocity of 2982fps ES 12-14 SD 5-6, .25-.45" rifle, if you can manage an AR10, they can be tricky. Hold has to be spot on.
Scope is an Arken EP5 5-25 with all the accessories and in a 20moa Arken mount.
$1250.00 rifle only.
$1650.00 rifle and scope.
I rarely shoot my AR15s, and this AR10 never gets used, hasn't been fired since load development. I'd rather free up the funds for other things.
Some other things I'd take on trade. Timney HIT trigger for M700, Berger 108 Elite hunters, Berger 153.5 LRHTs, Berger 85.5s, Berger 180 hybrids, Berger 184 F open hybrids, Hornady 180 ELDMs, Berger 208 LRHTs, Berger 144 LRHTs. Hornady 7mm PRC die set. Sightron S6 5-30 or SVIII 5-40 both in mrad. Cash on either end of course. Also an MDT LSS Premier for a long action 700 or clone. Savage style prefit in 6ARC or 6mm Grendel 26" plus. Open to 6mm, 6.5, 7, and 30 cal blanks at least 28" finish length and MTU or heavier.
