New – Unfired. $360 Shipped or best offer – Listed on other websites. Post “I'll take it” in this forum, and then PM at: [email protected]. I'll go by time stamp on forum. Daniel Defense Barrel AR-15 5.56x45mm NATO Government Contour Mid Length Gas Port 1 in 7" Twist 16" Hammer Forged Chrome Lined Chrome Moly Matte Pre-Ban Technical Information: Length: 16" Material: 4150 Chrome Moly Vanadium, Cold Hammer Forged Contour: Government Chamber: 5.56x45mm NATO Twist Rate: 1 in 7" Chrome Lined: Yes Finish: Mil-Spec Heavy Phosphate M4 Feed Ramps: Yes Muzzle Thread Pattern: 1/2"-28 Gas Port Location: Mid Exterior Diameter at Gas Port: 0.750" Uploaded with ImageShack.us Uploaded with ImageShack.us All Daniel Defense Cold Hammer Forged AR-15 Barrels are constructed of Mil-Spec 4150 Chrome Moly Vanadium Steel that is hydraulically shaped by carbide steel hammers around a precision machined mandrel to form the chamber, lands, and grooves. This Hammer Forging process creates a defect-free bore with the most consistent chamber possible, and each of Daniel Defense's barrels undergoes a Magnetic Particle Inspection (MPI) test to ensure this standard of perfection is achieved. All stripped barrels come equipped with an A4 Barrel Extension with extended M4 Feed Ramps for enhanced feeding reliability and a pre-installed locator pin. This 16" AR-15 Barrel features a Government Profile that is slim under the handguard and heavy forward of the gas block, a Mid Length Gas Port for a smoother recoil impulse, and a Chrome Lined Chamber and Bore for enhanced wear and corrosion resistance. Its 5.56x45mm NATO Chamber is fully compatible and safe for use with both surplus mil-spec and commercial ammunition, while its 1 in 7" Rifling Twist Rate is ideal for use with medium to heavy weight projectiles of up to about 77 grains. Proudly manufactured in the USA.