• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED FS: 338 Lapua loading components

Brad7348

Well-Known Member
Joined
Aug 5, 2013
Messages
91
Location
Dallas TX
I have the following 338 Lapua Magnum loading components that I need to part with:

87 pieces of 2X fired Lapua brass. It is tumbled and annealed. I shoot a fairly conservative load so I haven't needed to trim brass. Just check length, de-prime and size and you are ready to go. $150 shipped for the lot. (Roughly $1.75 each) I will have more of this including some once fired brass but I still need to clean it.

Dies: $250 shipped for the lot
RCBS gold medal neck bushing die
Redding seater die with the Redding micrometer installed with VLD seating plug.
Lyman FL size and seating die set
Redding Competition Seating Die with micrometer

Qty 200 - 300gr Sierra SMK HPBT - $120 shipped
 
I also have the following:
41 - 3x fired Lapua cases - tumbled annealed de-primed. Just size and go. ($65 for the lot)
29 - 1x fired Lapua cases - tumbled annealed de-primed ($50 for the lot)
 
1 and 2X fired brass and the SMKs are sold.

I still have the 3X fired brass and dies for sale.
 
I have the following left:

Dies: $250 shipped for the lot
RCBS gold medal neck bushing die
Redding seater die with the Redding micrometer installed with VLD seating plug.
Lyman FL size and seating die set
Redding Competition Seating Die with micrometer

41 - 3x fired Lapua cases - tumbled annealed de-primed. Just size and go. ($65 for the lot)
 
Bump - still have

41 - 3x fired Lapua cases - tumbled annealed de-primed. Just size and go. ($65 for the lot)

Dies: $250 shipped for the lot
RCBS gold medal neck bushing die
Redding seater die with the Redding micrometer installed with VLD seating plug.
Lyman FL size and seating die set
Redding Competition Seating Die with micrometer
 
Top